Anti-Slip Products

ANTI SLIP BOLT DOWN/SCREW DOWN PLATES
These bolt down,  anti slip plates are ideal for application in areas where anti slip tape or anti slip paint is not suitable i.e constantly wet or loose surfaces.

CLEAR ANTI-SLIP DECKING PAINT
Clear finely textured finish that is tough, durable, with excellent anti-slip properties for use on decks, steps, ramps and inclines.

FLOOR PAINT HARD HAT 7100 SERIES  
Fast & durable floor protection. A single pack floor coating, available as a standard floor coating as well as in an anti-slip version. Available in a range of colours.

GRIPFAST
Single coat, two-pack epoxy anti-slip - easy to apply

ANTI SLIP DECKING STRIPS
Tough, weatherproof strips to give existing wooden decking a slip resistant and attractive surface.

ANTI SLIP SAFETY RANGE OF PRODUCTS Call or email for up to date prices
Includes ramps, step edges and covers, landing covers, decking strips, and a range of floor coatings new to the range.

SELF ADHESIVE ANTI-SLIP TAPES.
There may be places where only anti-slip strips are required, such as on stair treads nosings, or where standard paint products suffer adhesion difficulties.

PROTECTAKOTE
The multi-purpose, anti-slip, abrasion resistant, protective coating.

PROTECTAKOTE ON A ROLL?
Looks the same, but simply unroll, peel off the back and stick down.
It has the feel of a rubber yet possesses the dimensional stability plastic brings. Anti Slip and not abrasive.

FLOORCOTE NON SKID DECK PAINT
A low profile, non-slip surface which is easily applied to areas where sure foot conditions are essential. The product has good drying characteristics, hence short down times and can be applied to most surfaces without major preparatory steps. 
Metal and wood deck areas of seagoing vessels, wet and slippery walkways and production environments, where minimum interruption can be tolerated.

ANTI-SLIP AEROSOLS 
should be used interior/exterior in light industrial exposures where anti-slip characteristics are required. The product is also available in clear.

SUPER TRIDENT
A water based single pack anti-slip floor coating containing a mineral aggregate and durable light-fast pigments.
Designed for internal or covered areas for light or medium foot traffic, where a decorative and slip resistant finish is required.

EPOXYSHIELD GARAGE FLOOR PAINT
Not an anti-slip floor coating, but a Complete Kit for coating a Garage Floor.

FLOORCOTE POLYURETHANE QUICK DRY GLOSS
Floorcote Quick Dry Gloss is a tough, wear resistant film coating which provides ideal floor protection for workshops, showrooms, storage areas and garages. Low slip additives available.

FLOORCOTE EPOXY FINISH
A two pack epoxy finish for maximum protection against abrasion, chemicals and solvents. Floorcote Epoxy Finish will give superb penetration, bonding and a resistant, durable surface able to withstand years of heavy duty wear requiring minimum maintenance. For wet and dangerous areas a non skid version is recommended. 
Ideal for walkways, heavily used wet areas, factories subject to heavy traffic (fork lift areas) and transport depots where maximum resistance to abrasion, chemicals, sea water, solvents and high humidity are required.

SP EPOXY
Single pack epoxy textured (or smooth) floor paint

POLYURETHANE FLOOR PAINT
Polyurethane textured (or smooth) floor paint

ANTI SLIP SYSTEM FOR CERAMIC TILES
An easy to use, clear treatment to prepare surfaces for the application of ProtectaKote. Does not damage or change the appearance of the surface.

POUR & ROLL
A two pack solvent-free polyurethane self levelling coating material.
Designed for application to steel and concrete, heavy duty flooring, grouting and encapsulation. Rapid drying and curing characteristics, allowing early completion of coating to recommended film thicknesses.