Anti-Slip Paint & Strips
Paco Systems now offers an extensive range of anti-slip paints and anti-slip strip products, all exceeding industry standards at very competitive prices. Our range includes everything from anti-slip paints for use on wooden decking, metal steps, concrete, garages and factory floors, to low profile anti-slip strips that add a coarse slip resistant surface to wooden decking.
NON SKID DECK PAINT
A low profile, non-slip surface which is easily applied to areas where sure foot conditions are essential. The product has good drying characteristics, hence short down times and can be applied to most surfaces without major preparatory steps.
Metal and wood deck areas of seagoing vessels, wet and slippery walkways and production environments, where minimum interruption can be tolerated.
ANTI SLIP SYSTEM FOR CERAMIC TILES
An easy to use, clear treatment to prepare surfaces for the application of ProtectaKote. Does not damage or change the appearance of the surface.
Single coat, two-pack epoxy anti-slip – easy to apply, very tough, available in a wide range of colours.
SafeKote is an anti-slip paint that has an attractive, low gloss finish, which is easy to apply and to clean, with an extremely abrasion and weather resistant film. Ideal for the marine environment too.
The multi-purpose, anti-slip, abrasion resistant, protective coating.
ANTI SLIP BOLT DOWN/SCREW DOWN PLATES
These bolt down, anti slip plates are ideal for application in areas where anti slip tape or anti slip paint is not suitable i.e constantly wet or loose surfaces.
CLEAR ANTI-SLIP DECKING PAINT
Clear finely textured finish that is tough, durable, with excellent anti-slip properties for use on decks, steps, ramps and inclines.
SELF ADHESIVE ANTI-SLIP TAPES
There may be places where only anti-slip strips are required, such as on stair treads nosings, or where standard paint products suffer adhesion difficulties.
should be used interior/exterior in light industrial exposures where anti-slip characteristics are required. The product is also available in clear.
FLOORCOTE POLYURETHANE SEMI-GLOSS FINISH
Ideal for fast turnaround applications in workshops, offices, factory floors, garages, showrooms and warehouses where a cost effective but oil and chemical resistant finish is required.
FLOORCOTE EPOXY FINISH
A two pack epoxy finish for maximum protection against abrasion, chemicals and solvents. Floorcote Epoxy Finish will give superb penetration, bonding and a resistant, durable surface able to withstand years of heavy duty wear requiring minimum maintenance. For wet and dangerous areas a non skid version is recommended.
Ideal for walkways, heavily used wet areas, factories subject to heavy traffic (fork lift areas) and transport depots where maximum resistance to abrasion, chemicals, sea water, solvents and high humidity are required.
PROTECTAKOTE ON A ROLL?
Resilient adhesive tape, looks the same but is actually a self adhesive anti slip tape that feels like ProtectaKote; simply unroll, peel off the back and stick down.
It has the feel of a rubber yet possesses the dimensional stability plastic brings. Anti Slip and not abrasive.