Anti Slip Cleats and Bolt/Screw Down Plates

To order, please see below.

cleatsThe self adhesive cleats are pre-cut pieces of the anti slip tapes that measure 150mm x 610mm, with rounded corners. Being pre-cut they are ideal for quick application to surfaces where an area of anti slip surface is required. The conformable cleats are ideal for use on checker plate for example, where the aluminium backing will conform to the ribbed surface.

The bolt down, anti slip plates are ideal for application in areas where anti slip tape/cleats or anti slip paint is not suitable i.e constantly wet or loose surfaces. Anti slip plates are manufactured specifically for these purposes, with countersunk eyelets for easy application, and can be fitted using screws, nails or clips. The standard bolt down plates are available in an off the shelf size of 115mm x 635mm, but dependent on order quantity they can be manufacture in different sizes.

The plates are made from weatherproof aluminium which will not tarnish in foul weather, with an anti slip coating covering most of the top surface and finished with rounded corners for a more aesthetic appearance, and can be provided with a range of surface finishes with standard (60g) surface, coarse (36g) surface and even Aqua-Safe, resilient and coarse resilient textures.
Do call us on 01626 207064 if you require clarification on the grades.

For further information relating to the surfaces available, please go to the Anti Slip Tape Page.

Save

Save

nonabrasive
Below shows approximate colour range of the Standard Grip anti slip surfacing.

Image 078Please note that the ‘Plate’ is the metal plate and the ‘Cleat’ is the attached surface with the anti slip properties.

The ‘Cleat’ can be purchased for adhesion to your own surface.

If you wish to purchase these, please contact us via the contact form above, or call us on 01626 207064

 

View Basket

Save

Save

Save

Save

Save