Resin based coatings and sealers for dust proofing, floor / wall coating and concrete protection

SF Coating

Solvent Free SF Epoxy Coating is used as a waterproof, tough, chemical resistant floor or wall coating in food preparation areas, breweries, abattoirs, bottling factories, etc.
As an internal lining for concrete or steel storage tanks containing oils, chemicals, water, etc. It is particularly suitable for chemical bunds.

Deckcoat

Flexible, PU modified epoxy coating  Typically used as an anti-slip membrane for car parks, walkways, ramps etc.
As a protective lining for chemical bunds.

ET Coating

Tar extended solvent free epoxy coating typically used for chemical bunds, sewage treatment works, effluent plants, anti-slip flooring, anti-corrosive protection of steelwork.

WB Primer

Damp tolerant water based epoxy primer typically used  As a clear sealer for concrete and masonry surfaces, as a primer for other Coatings e.g. Deckcoat, ET Coating and as a damp surface primer or sealer for concrete. Also used as a clear anti-graffiti coating and is suitable for use in food factories, chemical bunds, abattoirs, dairies, subways, laboratories, etc.

WB Coating

This Water Based Epoxy Coating can be used as a floor coating in food factories, abattoirs, dairies, laboratories etc., as a chemically resistant coating for bund areas. It is also an anti-graffiti coating as well as an hygienic coating, WB Coating produces an easily cleanable surface for walls, ceilings etc.

Steelprime

An anti-corrosive primer for steel work, as well as a holding primer for grit blasted steel surfaces. Also used as a chemical, and water vapour-resistant barrier coating for old and new concrete.

Floorseal

Low viscosity solvented Epoxy sealer, surface hardener and dustproofer for cementitious systems in factories, garages, engineering workshops, abattoirs, dairies, etc.

Cureseal

Acrylic resin based curing/sealing treatment for new concrete and as a sealing/dust-proofing treatment for old concrete, to provide a sealed and dust-proof surface with resistance to the ingress of oil and chemical spillages. Also used as primer/sealer for subsequent top coats. Example areas: Industrial workshops, car parks, warehouses, food preparation areas, garages.

Screedseal

Matt sealer for resin screeds  As a chemical and abrasion resistant sealer for Epoxy and Polyurethane resin floor screeds and as clear, crack bridging, anti-graffiti coating for concrete and masonry surfaces.

Anti Carbonation Coating

Decorative Anti-carbonation coating  where new and existing concrete and masonry structures require protection from Water, Carbon Dioxide, Sulphur Dioxide, Oxides of Nitrogen, Chlorides, Sulphates and UV radiation. Typical examples: car parks, commercial and industrial buildings, bridges, subways, high rise flats, etc.

Jointseal

Epoxy sealant for saw cut joints used to seal floor joints in food factories and warehouses where heavy vehicular trafficking occurs.

Crackseal

Low viscosity Epoxy injection resin for cracks in concrete, brickwork and masonry.