::home::  ::products::  ::contact::  ::ordering::  ::anti-slip coatings:: 
Email us on any matter or phone us on 01626 207064,and if it is busy please leave a message.
Bitumastic ® COLOURED SOLUTION

Bitumastic® Coloured Solution is a reinforced advanced modified alkyd with added rust inhibitor specially formulated for aggressive environments, which provides a tough resilient barrier, impermeable to air and moisture, effectively sealing out corrosion.

The product has the benefit of being a one coat system (no primer or undercoat necessary).

It is economical with excellent hiding power, lead free colours, no hazardous solvents, and may be overcoated next day.

Typical uses:
For industrial, agricultural and domestic use.
For example, machinery, gates, drainpipes, warehouse doors, steel frames, steelwork on garages, gates and railings.

Colours Restricted Range (See below)
Finish Gloss
Theoretical Spreading Rate 10 - 13 square metres per litre
Application methods Brush, roller or spray
Drying times at 20'C
Touch dry 6 hours
Hard dry 24 hours
Minimum overcoating time 16 hours
Maximum overcoating time Indefinite
Recommended system Usually a one coat system
Pack sizes 1 & 5 litres


For a copy of the Bitumastic® Coloured Solution product data sheet in pdf format, please download from the end of the page, or e-mail us using the link at the top right of the page.

Standard Green Lt.  Brunswick Green Grass Green Dark Green
Standard Red Aluminium Cream Signal Red
Standard Grey Light Grey Battleship Grey Golden yellow
Regatta Dark Blue Oxford Blue Beaver
    White Black
Full range of BS4800 & RAL colours can be made to order
 Please contact us by clicking
here.

 

Bitumastic® Coloured Solution £44.84 per 5 litres
Please enter colour from above

Please enter quantity required

Delivery and VAT will be added at checkout

The above is only an idea of the colour range and should not be taken as accurate or complete.

 

For a copy of the product information, please click here.
Please note that you will require Adobe Reader to view the file.

 



NEWSLETTER
Subscribe
Unsubscribe  
 
 
 
 
 

© Paco Systems 1997 -- 2010

Terms & Conditions
The technical data and suggestions for use contained on this web site and in any literature provided by us are correct to the best of our knowledge, and offered in good faith.
The statements do not constitute a warranty, expressed, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All technical information is subject to change without notice.
“As for the precautions of use, hygiene and safety, please consult the relevant Material Safety Data Sheets - available on request”.