CP Stripper – ideal for removing modern finishes like powder coating
CP STRIPPER is a cold immersion paint stripper which has been developed to overcome the problems associated with more stubborn coatings such as stoved enamel and powder coat systems.
CP STRIPPER may be used on both ferrous and non ferrous metals, breaking down the coating with minimal attack on base metal. Do not use on plastic. Ideal for jig stripping and rework reclamation where the multicoated films encountered require this strong acid accelerator and penetrant blend.
CP STRIPPER has is also widely used for alloy wheel stripping.
CP STRIPPER is used as supplied and must not be diluted with water. Avoid water contamination of the bath as this may lead to possible corrosion of some metal substrates.
Use of an oil seal (approx 5cm) is advised to prevent solvent loss from the bath.
Immerse components in stripper and agitate if possible to speed up stripping process. Immerse until the paint has been removed or is sufficiently loose to be removed fully by high pressure rinsing.
CP STRIPPER is supplied in 25lt drums.
For a copy of the product information, click here.
Please note that you will require Adobe Reader to view the file.