click here to e-mail us  
   ::home::  ::products::  ::contact::  ::ordering::  ::anti-slip coatings:: 

Click here to email us on any matter or phone us on 01626 207064, and if you get our answer machine,
please leave a message, or we won't be able to call you back.
 If we can't take your call, leave a message and we will get back to you.
Loading

Epimastic MT

A two pack high build surface tolerant coal tar epoxy that combines the toughness, abrasion resistance and chemical resistance of a high performance epoxy resin with the excellent water resistance of coal tar. Epimastic MT has the benefit of being moisture tolerant (can be applied to damp substrates), surface tolerant (non immersed steelwork does not require abrasive blast cleaning), excellent water resistance, high build application (reduces application costs) and it meets the performance requirements of BS 5493 KF3.

USES
Epimastic MT can be used in under-water areas (e.g. jetties, piles, barges etc.), crude oil and crude oil/ballast tanks. Long term storage protection of steel exposed to rain in marine atmospheres etc. and pipeline exteriors. At recommended film thickness, please allow a minimum of 48 hours at 20ºC prior to immersion of the coating.

TECHNICAL PROPERTIES
Colour: Black
Finish: Slight Sheen
Mix Ratio 6:1 by volume Base : Curing Agent
Recommended Film Thickness 178-286μ WFT / 125-200μ DFT
Theoretical Spreading Rate 4-6 m2/litre

 

For a copy of the product information, please click here.
Please note that you will require Adobe Reader to view the file.




Your Basket
 
Quantity:
Total:

View Basket
 
 
 

Click here for
Vactan - The most asked for
Rust Converter/Rust Treatment

 
 

© Paco Systems 1997 -- 2012

Terms & Conditions including Privacy Policy, Delivery Policy, Refund/Cancellation Policy.
The technical data and suggestions for use contained on this web site and in any literature provided by us are correct to the best of our knowledge, and offered in good faith.
The statements do not constitute a warranty, expressed, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All technical information is subject to change without notice.
“As for the precautions of use, hygiene and safety, please consult the relevant Material Safety Data Sheets - available on request”.