Paints and Coatings
A Range of Floor Paints for most applications.
If you can't find what you need, call us - 01626 207064
A single component, anti slip paint ideal for wet and dry
areas, internal or external, even in marine conditions.
Extremely abrasion and weather resistant.
The multi-purpose, anti-slip, abrasion resistant, protective
It is a single
pack, easy to apply material with a quick turnaround time.
Pour & Roll
A two pack solvent-free polyurethane self levelling coating
Designed for application to steel and concrete, heavy duty
flooring, grouting and encapsulation.
Rapid drying and curing
characteristics, allowing early completion of coating to
recommended film thicknesses.
Hard Hat 7100
Fast & durable floor protection.
pack floor coating, available as a standard floor coating as
well as in an anti-slip version. Available in a range of
the advantages of water paints (ease of application, virtually
less and non-hazardous) with the excellent mechanical resistance
of a two component product.
EPOXYSHIELD GARAGE FLOOR PAINT
A Complete Kit for coating
a Garage Floor.
FLOORCOTE RUBBERISED FINISH
A chlorinated rubber floor coating with high chemical
Resists acids, alkalines, oxidants and chemicals.
Resistant to high humidity, water and aggressive exposure
It is ideal for farm buildings, abattoirs, pickling and plating
areas, chemical environments and general factory areas requiring
good floor grip.
FLOORCOTE NON SKID DECK PAINT
A low profile, non-slip surface which is easily applied to areas
where sure foot conditions are essential.
The product has good
drying characteristics, hence short down times and can be
applied to most surfaces without major preparatory steps.
Metal and wood deck areas of seagoing vessels, wet and slippery
walkways and production environments, where minimum interruption
can be tolerated.
FLOORCOTE POLYURETHANE QUICK DRY GLOSS
Floorcote Quick Dry Gloss is a tough, wear resistant film
coating which provides ideal floor protection for workshops,
showrooms, storage areas and garages.
Low slip additives
FLOORCOTE POLYURETHANE SEMI-GLOSS FINISH
Ideal for fast turnaround applications in workshops, offices,
factory floors, garages, showrooms and warehouses where a cost
effective but oil and chemical resistant finish is required.
FLOORCOTE EPOXY FINISH
A two pack epoxy finish for maximum protection against abrasion,
chemicals and solvents.
Floorcote Epoxy Finish will give superb
penetration, bonding and a resistant, durable surface able to
withstand years of heavy duty wear requiring minimum
For wet and dangerous areas a non skid version is
Ideal for decks, walkways, heavily used wet areas, factories
subject to heavy traffic (fork lift areas) and transport depots
where maximum resistance to abrasion, chemicals, sea water,
solvents and high humidity are required.
should be used
interior/exterior in light industrial exposures where anti-slip
characteristics are required.
The product is also available in
Single coat, two-pack epoxy anti-slip
Single pack epoxy textured (or smooth) floor
Polyurethane Floor Paint
Polyurethane textured (or smooth) floor paint
A water based single pack floor coating based on an acrylic
co-polymer containing a mineral aggregate and durable light-fast
Designed for internal or covered areas for light or medium foot
traffic, where a decorative and slip resistant finish is
This page is always being updated.
Other products are available in the
Resin Building Products Ranges
If you have a requirement for floor coatings
and you cannot find the information above, please email us by