::home::  ::products::  ::contact::  ::ordering::  ::anti-slip coatings:: 

Click here to email us on any matter or Skype Chat with us by clicking here My status or phone us on 01626 207064,
and if it is busy please leave a message so that we can get back to you as soon as possible.


INTEX No.2

A thixotropic high build, fast drying coating formulated using selective bitumen and high quality mineral fillers giving a tough flexible and attractive matt finish.

·Tough flexible film
·High build application of 100 microns per coat
·
Good general purpose corrosion protection
·
Fast drying giving quick handling times
·
Can be applied by brush, roller, conventional or airless spray

Typical uses are:  
·
Pipeline exterior use
·
Fixtures and fittings used in the water industry  
·
Manhole covers, tanks etc  
·
To prevent water loss on masonry surfaces  
·
Waterproofing for buried metallic objects e.g. Lamp posts, Guardrails etc

Colour Black
Finish Matt
Theoretical spreading rate 4.3 - 5.0 sq. m per litre
Application methods Brush, roller, conventional or airless spray
Drying Times at 25°C
Touch dry 30 mins
Hard dry 1 hour
Minimum overcoating 16 hours
Maximum overcoating Indefinite

 

For a copy of the product information, please click here.
Please note that you will require Adobe Reader to view the file.

* Standards may change from time to time according to local, national or international regulations.



 
 
 
 
 

© Paco Systems 1997 -- 2007

Terms & Conditions
The technical data and suggestions for use contained on this web site and in any literature provided by us are correct to the best of our knowledge, and offered in good faith.
The statements do not constitute a warranty, expressed, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All technical information is subject to change without notice.
“As for the precautions of use, hygiene and safety, please consult the relevant Material Safety Data Sheets - available on request”.