INTEX No.2

Recommended alternative for Comastic

To order, please call 01626 207064 or use contact link above.

A thixotropic high build, fast drying coating formulated using selective bitumen and high quality mineral fillers giving a tough flexible and attractive matt finish.

  • Tough flexible film
  • High build application of 100 microns per coat
  • Good general purpose corrosion protection
  • Fast drying giving quick handling times
  • Can be applied by brush, roller, conventional or airless spray

Typical uses are:

  • Pipeline exterior use
  • Fixtures and fittings used in the water industry*
  • Manhole covers, tanks etc
  • To prevent water loss on masonry surfaces
  • Waterproofing for buried metallic objects e.g. Lamp posts, Guardrails etc

Colour
Finish
Theoretical Spreading Rate
Application methods
Drying times at 25’C
Touch dry
Hard dry
Minimum overcoating time
Maximum overcoating time

Black
Matt
4.3 – 5.0 sq metres per litre
Brush, roller, conventional or airless spray

30 mins
1 hour
16 hours
Indefinite

Click here for Intex product information
Please note that you will require Adobe Reader to view the file.

* Standards may change from time to time according to local, national or international regulations.