click here to e-mail us  
   ::home::  ::products::  ::contact::  ::ordering::  ::anti-slip coatings:: 

Click here to email us on any matter or phone us on 01626 207064, and if you get our answer machine,
please leave a message, or we won't be able to call you back.
 If we can't take your call, leave a message and we will get back to you.
Loading


SEALEX B130

A gelled thixotropic bitumen solution for use as a heavy duty protective coating for iron, steel, concrete and cement asbestos substrates.


Key features:
· Approved to meet BS6949 Type II
· Meets the Railtrack requirements RT98 5.3.2
· High build application in a single coat
· Surface tolerant - can be applied to wired brushed substrates
· Flexible to resist cracking

Typical uses:
· As a waterproofing product for under bodies of vehicle
· As an anti corrosive coating in difficult to reach areas, e.g. box section
· Pipe work externals
· Piles or buried steelwork
· As an underwater anti-corrosive coating for narrow boats 

Colour Black
Finish Semi Gloss
Theoretical spreading rate 3.3 - 5.0 sq. m per litre
Application methods Brush, roller or airless spray
Drying Times at 20°C
Touch dry 2 hours
Hard dry 6 hours
Minimum overcoating time 16 hours
Maximum overcoating time Indefinite

 

Sealex B130 £19.60 per 5 litres
 VAT & delivery will be added before checkout.		  
Quantity :
 Sealex B130 £74.33 per 20 litres
 VAT & delivery will be added before checkout.		  
Quantity :
Thinners to suit £16.15 per 5 litres
 		  
Quantity :

 

For a copy of the product information, please click here.
 Please note that you will require Adobe Reader to view the file.

 




Your Basket
 
Quantity:
Total:

View Basket
 
 
 

Click here for
Vactan - The most asked for
Rust Converter/Rust Treatment

 
 

© Paco Systems 1997 -- 2012

Terms & Conditions including Privacy Policy, Delivery Policy, Refund/Cancellation Policy.
The technical data and suggestions for use contained on this web site and in any literature provided by us are correct to the best of our knowledge, and offered in good faith.
The statements do not constitute a warranty, expressed, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All technical information is subject to change without notice.
“As for the precautions of use, hygiene and safety, please consult the relevant Material Safety Data Sheets - available on request”.