click here to e-mail us  
   ::home::  ::products::  ::contact::  ::ordering::  ::anti-slip coatings:: 

Click here to email us on any matter or phone us on 01626 207064, and if you get our answer machine,
please leave a message, or we won't be able to call you back.
 If we can't take your call, leave a message and we will get back to you.
Loading

Resin Building Products
Additional Products

SF (Solvent Free) Fast Cure

Description

As with the standard SF system, Solvent Free Fast Cure Epoxy Resin System has been developed to provide protective and decorative properties to concrete, steel and other substrates. As a fast cure material, it can be hard dry typically within 5 hours at 20'C.

The material is supplied as a two pack system, comprising pre-weighed amounts of base and curing agent.

After mixing together an easily applied chemical and abrasion resistant finish is produced with fast cure characteristics.

Should an anti slip finish be required, then an appropriate Silica Sand or other aggregate can be broadcast after the first coat. Full details are provided on the Technical data sheet. 

Typical Uses

As a waterproof, tough, chemical resistant floor or wall coating in food preparation areas it has the advantage of being solvent free. Hence there will be minimal concern in breweries, abattoirs, bottling factories etc.

As an internal lining for concrete or steel storage tanks containing oils, chemicals, water etc.

It is particularly suitable for chemical bunds and appropriate where a fast return to service is necessary.

Advantages

  • Solvent free, low odour
  • Very good chemical resistance
  • Excellent adhesion to concrete and steel
  • High build
  • Tough and durable
  • Easily applied
  • Hygienic and easily cleaned
  • Low temperature curing

For a copy of the product information, please click here.
 Please note that you will require Adobe Reader to view the file.

 




Your Basket
 
Quantity:
Total:

View Basket
 

Need a quick anti slip coating?
CLICK HERE

 

Click here for
Vactan - The most asked for
Rust Converter/Rust Treatment

 
 

© Paco Systems 1997 -- 2012

Terms & Conditions including Privacy Policy, Delivery Policy, Refund/Cancellation Policy.
The technical data and suggestions for use contained on this web site and in any literature provided by us are correct to the best of our knowledge, and offered in good faith.
The statements do not constitute a warranty, expressed, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All technical information is subject to change without notice.
“As for the precautions of use, hygiene and safety, please consult the relevant Material Safety Data Sheets - available on request”.