::home::  ::products::  ::contact::  ::ordering::  ::anti-slip coatings:: 

Rust Converter

 Looking for a good topcoat over Vactan?

Vactan

VACTAN is a rust converter that neutralises the corrosion process by converting the rust into a metallo-organic complex which passivates the surface. It then further protects the surface by forming a film with low permeability to water vapour and oxygen.

VACTAN rust converter can be used in the following areas:
Manufacturing, Agriculture, Automotive, Local Authority, Road Haulage,
Chemical, Marine, Heavy Engineering, Building and Construction, DIY, etc.

VACTANis a self priming rust converter but for long term protection it is advisable to overcoat with a suitable water or solvent base midcoat or topcoat.

VACTAN rust converter has been designed for application by spray and brush.

VACTAN can be applied over damp surfaces and dries quickly under suitable temperature and humidity conditions.

VACTAN will be touch dry in approximately 10 minutes at 20'C.

VACTAN may be coated when cured with any conventional paint using brush, roller or spray.

VACTAN has been tested and certified as fit for use for the use for the carriage of grain and use in potable water systems. It may also be used in sensitive foodstuff areas.

VACTAN is non-flammable and can be regarded as essentially non-hazardous under normal use.
 

Vactan Rust Converter 1lt £11.20 ea
VAT & delivery will be added before checkout.
 
Quantity :
Vactan Rust Converter 5lt £47.13 ea
VAT & delivery will be added before checkout.
 
Quantity :

 

Live in the DIJON area of France? Looking for some Vactan?
Drop us an email, we may be able to help.

 

Extract from Report No. 2849/149/86 issued by the Occupational Hygiene Unit of the North of England Industrial Health Service. 

Extract from a report on rust converting chemicals. Trial Conducted by Ministry of Defence. Dated 23.4.87

 

For a copy of the product information, please click here.
Please note that you will require Adobe Reader to view the file.

Looking for a good topcoat over Vactan?
Bitumastic® Coloured Solution is a reinforced advanced modified alkyd with added rust inhibitor specially formulated for aggressive environments, which provides a tough resilient barrier, impermeable to air and moisture, effectively sealing out corrosion.
The product has the benefit of being a one coat system (no primer or undercoat necessary).
It is economical with excellent hiding power, lead free colours and no hazardous solvents.



Your Basket

Quantity:
Total:

View Basket

 

Need to order a small quantity of Vactan
(1/2 litre)? Click Below
  This can only be sent to addresses with a UK postcode.
Price £7.92.
Postage £4.00
VAT will be added at checkout.

(Postage is only to UK postcode areas and in the event of a Royal Mail strike, orders will be held until postage is again available.)

 

 

 

 

 

 

 

 

Need to order Vactan?
This pricing is for carrier delivery and only applies to mainland UK and excludes the following postcodes: AB, DD, IV, KW, KY, PA & PH. If this affects you, please email us with your requirements.


 

 
 

© Paco Systems 1997 -- 2012

Terms & Conditions including Privacy Policy, Delivery Policy, Refund/Cancellation Policy.
The technical data and suggestions for use contained on this web site and in any literature provided by us are correct to the best of our knowledge, and offered in good faith.
The statements do not constitute a warranty, expressed, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All technical information is subject to change without notice.
“As for the precautions of use, hygiene and safety, please consult the relevant Material Safety Data Sheets - available on request”.